Dr. Fritz Faulhaber GmbH & Co. KGPlanetary gearboxes – robust and precise
Thanks to their robust construction, FAULHABER metal planetary gearboxes in combination with FAULHABER DC-motors are ideal for applications which demand the highest torque.
But FAULHABER also offers the right products for moderate output torques – the plastic planetary gearboxes. These are characterised by their exceptional material combination and an optimum price-performance ratio.
Because planetary gearboxes are especially efficient, they are suitable for continuous, intermittent and alternating operation as well as for clockwise and anticlockwise rotation. Their use results in an increased performance of the entire drive train since the choice of the right gearbox allows for a smaller motor and thereby increases the economic efficiency of the entire drive train.
Metal planetary gearbox
FAULHABER metal planetary gearboxes are designed for robustness to sustain intermittent or sudden load changes. Depending on the diameter size, these gearboxes can sustain an input speed of up to 20,000 min-1 or an output torque of up to 25 Nm when operating in intermittent cycles. Due to their low backlash characteristic and the resulting high accuracy, the metal planetary gearboxes are also ideally suited for precise positioning applications.
For moderate output torques, plastic FAULHABER planetary gearboxes offer the best price-performance ratio with their exceptional material combination.
To reduce the noise level at higher speeds, the gears of the input stage are constructed of plastic. For the highest torques, vacuum applications or high temperatures, the input stage is available in steel. Furthermore, modfied lubrication aids with difficult operating conditions.
FAULHABER plastic planetary gearheads are also ideal for drives where the power-to-weight ratio plays a role. The assembly "gearbox/motor" is very easy via a gearbox flange which can be screwed on at the front side.
Thanks to their robust construction, FAULHABER metal planetary gearboxes in combination with FAULHABER DC-motors are ideal for applications which demand the highest torque.
But FAULHABER...
Stepper motors can be used for more than just a rotation.
When combined with lead screws, they provide a high accuracy linear positioning system that provides the benefits of a stepper (open loop c...
For higher positioning and speed control, FAULHABER provides a wide range of encoders to combine with the complete portfolio of FAULHABER DC-, brushless, and stepper motors. In the area of encoders, F...
FAULHABER Speed Controllers are specifically designed to get the most out of FAULHABER DC and BL motors. They are compact, easy to operate and offer precise as well as efficient speed control. The ind...
Point of Care (PoC) analysis
If results are to be available promptly so that quick decisions can be made on the basis of laboratory values in intensive care units, outpatient clinics or doctor'...
Most users do not need individual motors to realise their drive solutions. They are better off with complete drive systems in which the individual components are perfectly matched to each other. A sol...
When it comes to executing translational motions as efficiently and flexibly as possible, linear motors are generally used. Unlike rotating motors, linear motors do not produce rotating movements but...
With its DM66200H series, FAULHABER is opening up a whole new dimension in performance for motors with internal opening (aperture). As a direct drive, the new hollow shaft motor operates backlash-free...
Coreless DC motors from FAULHABER differ from conventional DC motors with iron armatures primarily due to their ironless, self-supporting copper coil with skew-wound design. Thanks to this design, the...
High-performance in the smallest of spaces – the FAULHABER portfolio today spans from 4-pole servomotors for high torques to highly efficient flat motors and extremely small brushless DC micromo...
For demanding positioning tasks that require a high level of accuracy, stepper motors are generally used. The name comes from the operating principle, as the stepper motors are driven by an electromag...
During the 1980s, the founders of PiezoMotor AB, Professor Stefan Johansson and Dr Mats Bexell started their research on micro motion systems. After almost ten years of research, they were awarded the...
FAULHABER Motion Control Systems combine the high performance of a FAULHABER brushless motor with tailor made drive electronics to create the industry’s most compact integrated motion solutions....
With its speed and torque, the new AM3248 stepper motor from FAULHABER raises the bar in terms of performance and dimensions. Offering up to 10,000 rpm, it can achieve five times the speed of comparab...
With the all-new Linear Actuator L product family FAULHABER is offering a unique turn-key-solution for a broad range of applications. The smaller versions 06L/08L/10L are ideal for medical, lab automa...
FAULHABER has added another extremely compact Motion Controller without housing to its product range. The new Motion Controller is ideal for integration in equipment manufacturing and medical technolo...
With its drive technology webinars, which are around one hour in length, FAULHABER provides the possibility of bringing your knowledge up to speed without having to spend too much time and effort. Mis...
Most users need more than just individual motors to realise their drive solutions. The motors have to be combined with the matching components such as gearheads, encoders and motion controllers in ord...
Become a member of the “World Center for Medical Technology“
Become a digital exhibitor yourself in the online portal of the largest and best-known MedTech cluster region in Germany and inform the world of medical technology about your products and services as well as about news, events and career opportunities.
With an attractive online profile, we will help you to present yourself professionally on our portal as well as on Google and on social media.